![]() With the glass cleaned, loose toner removed and the drum cleaned, the streaks should be gone. Place the drum back in the copier carefully, and replace the toner cartridge. Remove any toner or other debris from the drum by spraying it with compressed air. ![]() Lift the drum carefully out of the copier using a microfiber cloth instead of your bare hands.Įxamine the drum for cracks or scratches if any are present you will need to replace the drum. Remove the toner cartridge again so that you can access the drum. Turn off any bright lights in the copier room to avoid damaging the copier drum. Usually the screen is not cracked at all and most iPhone users can. ![]() If the streaks remain, they are likely the result of toner, debris or scratches on the copier drum. Sometimes it looks like an 'ink' spot or an almost perfect black spot. Replace the toner cartridge and make another blank copy. Use the air to clean portions of the copier that you cannot easily reach, such as the paper feed. Wipe the cartridge clean with a dry cloth and use a vacuum to remove any loose toner from the area where the cartridge is installed.īlow loose toner and other debris free from the inside of the copier using a can of compressed air. Open the front panel of the copier and remove the toner cartridge. ![]() Make a single blank copy to determine whether this corrects the problem. Clean the glass on the copier to remove any spots or deposited materials such as correction fluid that may have stuck to the glass when making copies. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |